Am命令用法

Posted by JackPeng on February 27, 2016

一、概述

作为一名开发者,相信对adb指令一定不会陌生。那么在手机连接adb后,可通过am命令做很多操作:

(1) 拨打电话10086

adb shell am start -a android.intent.action.CALL -d tel:10086

(2) 打开网站www.gityuan.com

adb shell am start -a android.intent.action.VIEW -d  http://gityuan.com

(3) 启动Activity: 启动包名为com.yuanhh.app,主Activity为.MainActivity,且extra数据以”website”为key, “yuanh.com”为value。通过java代码要完成该功能虽然不复杂,但至少需要一个android环境,而通过adb的方式,只需要在adb窗口,输入如下命令便可完成:

am start -n com.yuanhh.app/.MainActivity -es website gityuan.com

am命令还可以启动Service、Broadcast,杀进程,监控等功能,这些功能都非常便捷调试程序,接下来讲述关于am更多更详细的功能。

二、Am命令

命令格式:

am [subcommand] [options]

命令列表:

命令 功能 实现方法
am start [options] <INTENT> 启动Activity startActivityAsUser
am startservice <INTENT> 启动Service startService
am stopservice <INTENT> 停止Service stopService
am broadcast <INTENT> 发送广播 broadcastIntent
am kill <PACKAGE> 杀指定后台进程 killBackgroundProcesses
am kill-all 杀所有后台进程 killAllBackgroundProcesses
am force-stop <PACKAGE> 强杀进程 forceStopPackage
am hang 系统卡住 hang
am restart 重启 restart
am bug-report 创建bugreport requestBugReport
am dumpheap <pid> <file> 进程pid的堆信息输出到file dumpheap
am send-trim-memory <pid> <level> 收紧进程的内存 setProcessMemoryTrimLevel
am monitor 监控 MyActivityController.run

am命令实的实现方式在Am.java,最终几乎都是调用ActivityManagerService相应的方法来完成的,am monitor除外。比如前面概述中介绍的命令am start -a android.intent.action.VIEW -d http://gityuan.com, 启动Acitivty最终调用的是ActivityManagerService类的startActivityAsUser()方法来完成的。再比如am kill-all命令,最终的实现工作是由ActivityManagerService的killBackgroundProcesses()方法完成的。

接下来,说说[options]和 <INTENT>参数的意义以及如何正确取值。

三、 Options

3.1 启动Activity

主要是启动Activity命令am start [options] <INTENT>使用options参数,接下来列举Activity命令的[options]参数:

  • -D: 允许调试功能
  • -W: 等待app启动完成
  • -R <COUNT>: 重复启动Activity COUNT次
  • -S: 启动activity之前,先调用forceStopPackage()方法强制停止app.
  • –opengl-trace: 运行获取OpenGL函数的trace
  • –user <USER_ID> | current: 指定用户来运行App,默认为当前用户。
  • –start-profiler <FILE>: 启动profiler,并将结果发送到 <FILE>;
  • -P <FILE>: 类似 –start-profiler,不同的是当app进入idle状态,则停止profiling
  • –sampling INTERVAL: 设置profiler 取样时间间隔,单位ms;

启动Activity的实现原理: 存在-W参数则调用startActivityAndWait()方法来运行,否则startActivityAsUser()。

3.2 收紧内存

命令

am send-trim-memory  <pid> <level>

例如: 向pid=12345的进程,发出level=RUNNING_LOW的收紧内存命令

am send-trim-memory 12345 RUNNING_LOW。

那么level取值范围为: HIDDEN、RUNNING_MODERATE、BACKGROUND、RUNNING_LOW、MODERATE、RUNNING_CRITICAL、COMPLETE。

3.3 其他

对于am的子命令,startservice, stopservice, broadcast, kill, profile start, profile stop, dumpheap的可选参数都允许设置--user <USER_ID>。目前市面上的绝大多数手机还是单用户模式,故可以忽略该参数,默认为当前用户。

例如:启动id=10010的用户的指定service。

am startservice --user 10010

四、 Intent

Intent的参数和flags较多,本文为方便起见,分为3种类型参数,常用参数,Extra参数,Flags参数。

4.1 常用参数

  • -a <ACTION>: 指定Intent action, 实现原理Intent.setAction();
  • -n <COMPONENT>: 指定组件名,格式为{包名}/.{主Activity名},实现原理Intent.setComponent();
  • -d <DATA_URI>: 指定Intent data URI
  • -t <MIME_TYPE>: 指定Intent MIME Type
  • -c <CATEGORY> [-c <CATEGORY>] ...]:指定Intent category,实现原理Intent.addCategory()
  • -p <PACKAGE>: 指定包名,实现原理Intent.setPackage();
  • -f <FLAGS>: 添加flags,实现原理Intent.setFlags(int ),紧接着的参数必须是int型;

实例

am start -a android.intent.action.VIEW
am start -n com.yuanhh.app/.MainActivity
am start -d content://contacts/people/1
am start -t image/png
am start -c android.intent.category.APP_CONTACTS

4.2 Extra参数

(1). 基本类型

参数 -e/-es -esn -ez -ei -el -ef -eu -ecn
类型 String (String)null boolean int long float uri component

比如参数es是Extra String首字母简称,实例:

am start -n com.yuanhh.app/.MainActivity -es website gityuan.com 

此处-es website gityuan.com,等价于Intent.putExtra(“website”, “gityuan.com”);

(2). 数组类型

参数 -esa -eia -ela -efa
数组类型 String[] int[] long[] float[]

比如参数eia,是Extra int array首字母简称,多个value值之间以逗号隔开,实例:

am start -n com.yuanhh.app/.MainActivity -ela weekday 1,2,3,4,5 

此处-ela weekday 1,2,3,4,5,等价于Intent.putExtra(“weekday”, new int[]{1,2,3,4,5});

(3). ArrayList类型

参数 -esal -eial -elal -efal
List类型 String int long float

比如参数efal,是Extra float Array List首字母简称,多个value值之间以逗号隔开,实例:

am start -n com.yuanhh.app/.MainActivity -efal nums 1.2,2.2

此处-efal nums 1.2,2.2,等价于先构造ArrayList变量,再通过putExtra放入第二个参数。

4.3 Flags参数

在参数类型1中,提到有-f <FLAGS>,是通过Intent.setFlags(int )方法,来设置Intent的flags.本小节也是关于flags,是通过Intent.addFlags(int )方法。如下所示,所有的flags参数。

[--grant-read-uri-permission] [--grant-write-uri-permission]
[--grant-persistable-uri-permission] [--grant-prefix-uri-permission]
[--debug-log-resolution]
[--exclude-stopped-packages] [--include-stopped-packages]
[--activity-brought-to-front] [--activity-clear-top]
[--activity-clear-when-task-reset] [--activity-exclude-from-recents]
[--activity-launched-from-history] [--activity-multiple-task]
[--activity-no-animation] [--activity-no-history]
[--activity-no-user-action] [--activity-previous-is-top]
[--activity-reorder-to-front] [--activity-reset-task-if-needed]
[--activity-single-top] [--activity-clear-task]
[--activity-task-on-home]
[--receiver-registered-only] [--receiver-replace-pending]

例如,发送action=”broadcast.demo”的广播,并且对于forceStopPackage()的应用不允许接收该广播,命令如下:

am broadcast -a broadcast.demo --exclude-stopped-packages